Gas Appliance Installation & Servicing
Cooktops, ovens, and freestanding stoves — installed, serviced, commissioned, and fault-diagnosed properly.
If you want it done safely and tested on-site, we’re the team to call.
Our Services
Cooktops, Ovens, & Freestanding Stoves
Whether you’re upgrading the kitchen or replacing a tired unit, we’ll make sure your appliance is set up correctly for the gas type it’s connected to, tested for safe operation, and adjusted properly so it runs safely and as intended.
✓ Cooktop installation and replacement
✓ Oven installation and replacement
✓ Freestanding stove installation and replacement
✓ Appliance suitability checks
✓ Testing and verification after appliance work
Type A Appliance Servicing & Performance Checks
Gas appliances need proper inspection and testing — not guesswork.
Type A appliances are the common domestic-style appliances found in homes, such as cooktops, ovens, and freestanding stoves.
A service is about checking safe operation and performance.
✓ Burner operation and flame quality
✓ Burner pressure and performance verification
✓ Combustion/performance checks where applicable
✓ Ventilation checks where relevant
✓ Clear advice on what needs to happen next
Appliance Commissioning
Commissioning is the final step that confirms an appliance is set up correctly after it’s installed or replaced.
We commission appliances by testing, verifying, and adjusting where required so the appliance operates safely and as intended.
✓ Appliance testing after installation
✓ Burner and flame adjustment
✓ Gas type and setup checks
✓ Safe operation checks
✓ Certification or documentation where required
LPG to Natural Gas Conversions
Not every appliance is suitable for every gas type. Conversions need proper assessment — not guesswork.
We can assess your cooktop, oven or freestanding stove on-site and confirm whether conversion is suitable for that specific appliance model.
✓ Appliance suitability assessment
✓ LPG and Natural Gas setup checks
✓ Model suitability confirmation
✓ Correct adjustment where required
✓ Testing and verification after appliance work
Gas Appliance Fault Diagnostics & Rectification
If your appliance is playing up, we can diagnose it on-site and sort the fault properly.
We attend common appliance issues such as ignition problems, burners not lighting or not staying lit, irregular flame patterns, poor performance and inconsistent operation.
✓ Ignition problems
✓ Burner issues
✓ Irregular flame patterns
✓ Poor appliance performance
✓ On-site fault diagnosis and rectification
Australian Standards–Approved Gas Appliance Work
Gas appliance work is licensed work and needs proper testing and verification.
✓ Gas Work Licence: GWL-024429
✓ Fully insured
✓ Testing and verification completed after appliance work
✓ Standards-aligned, compliance-first workmanship
✓ Certification or compliance documentation provided where required
Important Notes
No DIY gas work. If it’s gas, it needs a licensed gas fitter on-site.
No troubleshooting over the phone. We book in and test it properly.
For pipework, regulator work, bayonet points or new gas lines, see our general gas fitting service.
FAQs
Do you install and replace gas cooktops, ovens, and freestanding stoves?
Yes — we handle appliance installation and replacement, then test and verify operation on-site.
Do you service Type A gas appliances?
Yes. Servicing is about checking performance and safe operation with proper inspection and testing.
Do you commission appliances after installation?
Yes. Commissioning confirms the appliance is set up correctly and operating as intended after installation or replacement.
My appliance isn’t working properly — can you fault-find and repair it?
Yes. We diagnose faults on-site and rectify issues where appropriate.
Can you convert my appliance from LPG to Natural Gas or Natural Gas to LPG?
In many cases, yes — but suitability depends on the specific appliance model. We assess it on-site and confirm what’s appropriate.
Can you diagnose the problem over the phone?
No. Gas appliance faults need on-site testing and verification.
Do you provide certification or compliance documentation?
Where required, certification or compliance documentation is provided after testing and verification is completed.
Do you service Maryborough and Hervey Bay?
Yes — we service Maryborough, Hervey Bay, the Fraser Coast and nearby areas.
Get Your Gas Sorted Today
For gas appliance installation, servicing, commissioning or fault diagnosis, call A GAS BLOKE Plumbing Services for licensed appliance work across Maryborough, Hervey Bay and the Fraser Coast.